SeasonalJobs.dol.gov

Job Description

Full Time:

Yes

Number of Workers Requested:

3

Job Duties:

*RFI Response 1. Details of the fabrication process, the materials used, and how the worker will contribute to the process: • 3-4 workers roll out 1350 sq ft PVC liner material on fabrication floor • Working from templates taken from tank floor and walls, workers will mark liner with grease pencils and cut with heavy-duty scissors • Bundle cut sheets on pallets • From template, 2 workers will use a Radio Frequency (RF) bar seamer to fuse and join pieces together to form shape of tank floor and walls while other workers pull and position liner • Workers will fold and roll finished pieces onto 4’ x 8’ pallet and wrap using stretch film wrap to prepare for storage and shipping • Worker must inspect material for scuffs or punctures to prep for installation 2. The installation process in its entirety and how the worker will contribute to the process: • Clean steel tank by sweeping and clearing debris using brooms • Insert 8 oz and 16 oz Non-Woven Geotextile fabric rolls, which measure 15’ wide and have a linear length of 150’, weighing approximately 300 lbs each into tank • Join together 16oz geotextile material on floor using heat guns • Erect scaffolding inside tank to cover walls with 8oz geotextile material • Apply J bolts to tank using watchets, nuts and washers • Will insert PVC pipe into liner hem and operate winches to lift wall liner • Seam-seal wall and floor pieces using a portable RF bar seamer • Inspect liner for tears or punctures and patch liner if necessary 3. The type of winches, drills, and any other tools/equipment that the employee will use: • heavy duty scissors • cordless 20v drill & impact • cable hand winches • scaffolding • PVC cutters • Ratchets • Screwdrivers • Hammers • wire cutters • wrenches • flashlights • lamps." *Original Fabrication of internal PVC tank liners requiring cutting, heavy lifting, and pulling of the material. Installing the liner inside of steel tanks using various tools such as winches, drills and scaffolding.

Job Classification:

51-2099.00 - Assemblers and Fabricators, All Other

Job Requirements

Experience Required:

No

Special Requirements:

Must be able to lift 50 lbs.

Number of Hours Per Week:

40

Work Schedule (Start/End time):

7:00 A.M. - 5:00 P.M.

Employer Information

Company Name:

Heartland Tank Services, Inc.

Location:

Oklahoma City, OK 73129

Worksite

Address:

5200 S. Hattie Ave, Oklahoma City, OK 73129

Job Order Details

ETA Case Number:

H-400-25349-482763

Multiple Worksites:

Yes

Date Posted:

12/22/2025

Piece Rate Offer

$0.00

Share